NSN 5305-00-915-2570
High Torque Screw
Between 0.386 inches and 0.416 inches fastener length, flat countersunk head style, between 0.280 inches and 0.337 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number NAS1152V2 for national stock number 5305009152570.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-915-2570.
-
MPN or Model
NAS1152V2
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.386 inches and 0.416 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.280 inches and 0.337 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Nas621, 6al-4v assn standard single material response -
Thread Series Designator
Unc -
Specification Data
80205-nas1152 professional/industrial association standard
More from these suppliers
- 5940-01-396-9984 MPN NAS1063A10-TB105ATerminal Board Marker Strip
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5305-00-058-4024 MPN MS24694S126Machine Screw
- 5305-00-103-9762 MPN NAS1081-08D6Setscrew
- 5305-00-118-3005 MPN AN565BC6H5Setscrew
- 5305-00-119-7448 MPN NAS1635-08LL16Socket Head Cap Screw
- 5305-00-165-7962 MPN NAS1352-04H8Socket Head Cap Screw
- 5305-00-267-8982 MPN MS90726-15Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-915-2570 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1152V2 | National Aerospace Standards |
10408122 | Nimikkeistokeskus Ncb Finland |