NSN 5305-00-915-2574
High Torque Screw
Between 0.323 inches and 0.353 inches fastener length, pan head style, between 0.306 inches and 0.322 inches head diameter, head height: between 0.105 inches and 0.115 inches .
Manufacturer part number NAS1132C1 for national stock number 5305009152574.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-915-2574.
-
MPN or Model
NAS1132C1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.323 inches and 0.353 inches -
Head Style
Pan -
Head Diameter
Between 0.306 inches and 0.322 inches -
Head Height
Between 0.105 inches and 0.115 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.052 inches and 0.072 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1132 professional/industrial association standard
More from these suppliers
- 1680-01-532-3062 MPN NAS77A6-020NAirc Sleeve Bushing
- 5305-00-008-5910 MPN NAS1189E3T10Socket Head Cap Screw
- 5305-00-026-1996 MPN NAS1352C06H14Socket Head Cap Screw
- 5305-00-052-5924 MPN MS35198-72Machine Screw
- 5305-00-069-5575 MPN MS90725-88Hexagon Head Cap Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-124-3097 MPN NAS1352C8LE20Socket Head Cap Screw
- 5305-00-167-3668 MPN AN525-8-32Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-915-2574 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1132C1 | National Aerospace Standards |