NSN 5305-00-915-2575
High Torque Screw
Between 0.386 inches and 0.416 inches fastener length, pan head style, between 0.306 inches and 0.322 inches head diameter, head height: between 0.105 inches and 0.115 inches .
Manufacturer part number NAS1132C2 for national stock number 5305009152575.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-915-2575.
-
MPN or Model
NAS1132C2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.386 inches and 0.416 inches -
Head Style
Pan -
Head Diameter
Between 0.306 inches and 0.322 inches -
Head Height
Between 0.105 inches and 0.115 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1132 professional/industrial association standard
More from these suppliers
- 5305-00-006-8306 MPN NAS1100C06-4PMachine Screw
- 5305-00-040-9354 MPN NAS514P428-18PMachine Screw
- 5305-00-052-5938 MPN MS35198-80Machine Screw
- 5305-00-069-0301 MPN NAS1352C04-6Socket Head Cap Screw
- 5305-00-071-8889 MPN MS27039C4-14Machine Screw
- 5305-00-078-9643 MPN MS27039-1-34Machine Screw
- 5305-00-079-7980 MPN MS24694S198Machine Screw
- 5305-00-111-0720 MPN NAS1102-3-32Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-915-2575 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1132C2 | National Aerospace Standards |