NSN 5305-00-915-2608
High Torque Screw
Between 0.449 inches and 0.479 inches fastener length, flat chamfer head style, between 0.296 inches and 0.313 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS1123C3H for national stock number 5305009152608.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-915-2608.
-
MPN or Model
NAS1123C3H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.449 inches and 0.479 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.296 inches and 0.313 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Hole Diameter
0.038 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.188 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 321.0 brinell standard -
Hole Configuration Style
Round -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1123 professional/industrial association standard
More from these suppliers
- 5940-00-872-0888 MPN NAS1745-3Conductor Splice
- 5940-01-382-0217 MPN NAS1063B216-225Terminal Board Marker Strip
- 1680-01-524-1349 MPN NAS520-12-9Aircr Air Duct Hose
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-006-8307 MPN NAS1218-4-36PMachine Screw
- 5305-00-045-3195 MPN NAS1505-24Machine Screw
- 5305-00-051-4483 MPN MS51973-8Setscrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-915-2608 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1123C3H | National Aerospace Standards |