NSN 5305-00-916-4615
High Torque Screw
Between 2.109 inches and 2.129 inches fastener length, flat countersunk head style, between 0.662 inches and 0.672 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number AIC1023H6-26 for national stock number 5305009164615.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-916-4615.
-
MPN or Model
AIC1023H6-26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.474 inches and 0.514 inches -
Fastener Length
Between 2.109 inches and 2.129 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.662 inches and 0.672 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
60.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6485 assn standard single material response -
Surface Treatment
Nickel and cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-008-5912 MPN IC551C-06-279Shoulder Screw
- 5305-00-145-0967 MPN NAS1101C08-36Machine Screw
- 5305-00-536-7266 MPN HT4027-7-7Close Tolerance Screw
- 5305-00-823-5807 MPN NAS1102-04-10Machine Screw
- 5305-01-020-9533 MPN AIC813-04R21Machine Screw
- 5305-01-191-3126 MPN AIC9535-7-34Close Tolerance Screw
- 5305-01-258-9114 MPN 51B335-9YClose Tolerance Screw
- 5305-01-284-8379 MPN AIC618-5-27Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-916-4615 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC1023H6-26 | Sps Technologies, Llc |
VT1039H6-26 | Arconic Global Fasteners & Rings, |
6040H6-26 | Sps Technologies, Llc |
HR101H6-26 | Hi-shear Corporation |
VT1039H6-26 | Alcoa Global Fasteners, Inc. |
CS318642H6-26 | Textron Fastening Systems |
HR101H6-26 | Lisi Aerospace Canada Corp |
C387H6-26 | Lockheed Martin Corporation |