NSN 5305-00-916-9492
High Torque Screw
Between 0.735 inches and 0.765 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS1155V6 for national stock number 5305009169492.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-916-9492.
-
MPN or Model
NAS1155V6
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
Between 0.735 inches and 0.765 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Nas 621 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1155 professional/industrial association standard
More from these suppliers
- 5930-00-850-3806 MPN NAS543-5Toggle Switch
- 5940-01-425-6527 MPN NAS1063A20-456Terminal Board Marker Strip
- 5905-01-160-8642 MPN NAS1330S6E-381Resistance Element
- 5305-00-043-2678 MPN MS24694S92Machine Screw
- 5305-00-052-6867 MPN MS24627-37Tapping Screw
- 5305-00-053-9355 MPN MS35191-259Machine Screw
- 5305-00-071-1779 MPN MS90725-126Hexagon Head Cap Screw
- 5305-00-079-2824 MPN NAS1101C4-10Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-916-9492 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1155V6 | National Aerospace Standards |