NSN 5305-00-919-5109
High Torque Screw
Between 1.551 inches and 1.581 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1154V20 for national stock number 5305009195109.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-919-5109.
-
MPN or Model
NAS1154V20
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 1.551 inches and 1.581 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r54520 -
Material Specification
Nas 621, 6al-4v assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1154 professional/industrial association standard
More from these suppliers
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5305-00-007-0217 MPN NAS1625-2Machine Screw
- 5305-00-052-4048 MPN MS3212-47Machine Screw
- 5305-00-057-0539 MPN NASM51958Machine Screw
- 5305-00-079-7969 MPN MS24694S218Machine Screw
- 5305-00-104-5074 MPN NAS1352-4LE44PSocket Head Cap Screw
- 5305-00-104-5076 MPN NAS1352-5LE56PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-919-5109 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1154V20 | National Aerospace Standards |