NSN 5305-00-920-0568
High Torque Screw
Between 1.386 inches and 1.416 inches fastener length, flat countersunk head style, between 0.280 inches and 0.327 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number NAS1152-18 for national stock number 5305009200568.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-920-0568.
-
MPN or Model
NAS1152-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.386 inches and 1.416 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.280 inches and 0.327 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
1.125 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1152 professional/industrial association standard
More from these suppliers
- 5940-00-923-4493 MPN NAS1745-4Conductor Splice
- 5940-01-666-3448 MPN NAS1063C3-608RATerminal Board Marker Strip
- 5305-00-003-6708 MPN NAS1096-10-13Machine Screw
- 5305-00-005-8111 MPN MS24671-88Socket Head Cap Screw
- 5305-00-051-2325 MPN NASM51958Machine Screw
- 5305-00-052-5968 MPN MS35202-14Machine Screw
- 5305-00-058-4017 MPN MS24694S119Machine Screw
- 5305-00-058-4039 MPN NAS1133-3Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-920-0568 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1152-18 | National Aerospace Standards |