NSN 5305-00-921-0031
Panel Screw
0.228 inches fastener length, flat chamfer head style, 0.102 inches head diameter, head height: 0.084 inches .
Manufacturer part number 168-62-03-09 for national stock number 5305009210031.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-921-0031.
-
MPN or Model
168-62-03-09
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.188 inches -
Fastener Length
0.228 inches -
Head Style
Flat chamfer -
Head Diameter
0.102 inches -
Head Height
0.084 inches -
First Diameter From Head
0.060 inches -
Second Diameter From Head
0.102 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.022 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
0.040 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.086 inches -
Thready Qty Per Inch (tpi)
56 -
Externally Relieved Body Diameter Quantity
2 -
Material
Steel comp 303 -
Material Specification
Qq-s-763 federal specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 5905-01-027-8054 MPN 3250005-001Film Fixed Resistor
- 5935-01-028-9443 MPN 3380062-001Electrical Receptacle Connector
- 5950-01-097-9246 MPN 171276-2Radio Frequency Coil
- 5985-01-166-5755 MPN 45009-1Antenna Reflector Section
- 6110-01-464-4597 MPN 110081-003Voltage Regulator Assembly
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
![Mechanic Bill explains Panel Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-00-921-0031 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
168-62-03-09 | Litton Systems Inc |
168-62-03-09 | Northrop Grumman Systems Corporation |
Stock Check
![](/public/images/partscage_shelf3.png)