NSN 5305-00-923-5069
High Torque Screw
Between 0.910 inches and 0.940 inches fastener length, flat chamfer head style, between 0.367 inches and 0.375 inches head diameter, head height: between 0.133 inches and 0.150 inches .
Manufacturer part number 7S32-4A8 for national stock number 5305009235069.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-923-5069.
-
MPN or Model
7S32-4A8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 0.910 inches and 0.940 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.367 inches and 0.375 inches -
Head Height
Between 0.133 inches and 0.150 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.168 inches first hole and 0.188 inches first hole -
Material
Steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1680-00-532-5339 MPN 192-637132Door Handle
- 1560-00-961-6390 MPN 285-220418-11Aircraft Structural Component Support
- 1560-01-164-6018 MPN L2100001-002Horizontal Stabilizer
- 4920-01-165-9233 MPN R-TBD-571Aircraft Maintenance Adapter Set
- 1560-01-183-5200 MPN L5852311-003Aircraft Structural Component Support
- 1560-01-190-9228 MPN L3003506-341Fairing Sole
- 1560-01-190-9238 MPN L3003506-118Fairing Shoe
- 5985-01-196-5860 MPN LE413-0277-0009Waveguide Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-923-5069 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7S32-4A8 | Boeing Company, The |