NSN 5305-00-923-8567
High Torque Screw
Between 2.499 inches and 2.546 inches fastener length, flat countersunk head style, between 0.262 inches and 1.272 inches head diameter, grip diameter: between 0.6230 inches and 0.6240 inches .
Manufacturer part number NAS340CA23 for national stock number 5305009238567.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-923-8567.
-
MPN or Model
NAS340CA23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.927 inches and 0.994 inches -
Fastener Length
Between 2.499 inches and 2.546 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.262 inches and 1.272 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.625 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Width Across Flats
Between 0.501 inches and 0.504 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas340 professional/industrial association standard
More from these suppliers
- 5305-01-406-3075 MPN 11881C3-11AClose Tolerance Screw
- 5305-01-417-2495 MPN 3M1170D4-20Close Tolerance Screw
- 5305-01-494-4355 MPN 11827C-22AClose Tolerance Screw
- 5305-01-512-8414 MPN 11845C3-7AFClose Tolerance Screw
- 5305-01-521-9556 MPN 11923-3-13Close Tolerance Screw
- 5305-01-581-7584 MPN 11923-5-10Close Tolerance Screw
- 5306-01-207-0195 MPN ST3M607-4DH28Shoulder Bolt
- 5306-01-208-5170 MPN 11939-5D12Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-923-8567 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS340CA23 | National Aerospace Standards |
NAS340CA23 | Level One Fasteners |
NAS340CA23 | Reid Products Inc. |