NSN 5305-00-925-0648
Panel Screw
Point style no. 7 0.035 in. Min,0.045 in. Max lg,119.5 to 120.5 deg of chamfered angle.
Manufacturer part number 8503287-1 for national stock number 5305009250648.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-925-0648.
-
MPN or Model
8503287-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.230 inches and 0.270 inches -
Fastener Length
Between 0.645 inches and 0.675 inches -
Head Style
Hexagon -
Head Height
0.160 inches -
Width Between Flats
Between 0.370 inches and 0.380 inches -
First Diameter From Head
Between 0.135 inches and 0.145 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.330 inches and 0.410 inches -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
207.0 brinell standard and 212.0 brinell standard -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 430f -
Material Specification
Astm a582 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5950-00-296-0843 MPN P720938G507Radio Frequency Transformer
- 5950-00-923-1308 MPN 8503295-6Radio Frequency Coil
- 5950-01-124-1628 MPN 8448268-1Coil Assembly
- 5930-01-152-3482 MPN 8553334Push Switch
- 5930-01-155-1266 MPN 8157046-15Push Switch
- 5930-01-286-8904 MPN 8160307-18Push Switch
- 5930-01-123-9334 MPN 8157824-1Rotary Switch
- 5305-01-270-3052 MPN LL-HX5-5691Socket Head Cap Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-925-0648 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
8503287-1 | Defense Logistics Agency |
8503287-1 | L-3 Communications Corporation |
8503287-1 | Lockheed Martin Corp |
8503287-1 | Defense Logistics Agency |
8503287-1 | L-3 Communications Corporation |
8503287-1 | Lockheed Martin Corp |
8503287-1 | Defense Logistics Agency |
8503287-1 | L-3 Communications Corporation |
8503287-1 | Lockheed Martin Corp |
8503287-1 | Defense Logistics Agency |
8503287-1 | L-3 Communications Corporation |
8503287-1 | Lockheed Martin Corp |
8503287-1 | Defense Logistics Agency |
8503287-1 | L-3 Communications Corporation |
8503287-1 | Lockheed Martin Corp |
8503287-1 | Defense Logistics Agency |
8503287-1 | L-3 Communications Corporation |
8503287-1 | Lockheed Martin Corp |