NSN 5305-00-927-4220
High Torque Screw
Between 0.886 inches and 0.916 inches fastener length, flat countersunk head style, between 0.280 inches and 0.337 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number NAS1152E10 for national stock number 5305009274220.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-927-4220.
-
MPN or Model
NAS1152E10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.886 inches and 0.916 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.280 inches and 0.337 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 321.0 brinell standard -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
A0110-006 fscm 43999 mfr ref single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1152 professional/industrial association standard
More from these suppliers
- 5940-00-920-3339 MPN NAS1745-2Conductor Splice
- 5940-01-362-7188 MPN NAS1063B-1-2Terminal Board Marker Strip
- 5940-01-475-8352 MPN NAS1063C2-513JTerminal Board Marker Strip
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-051-8496 MPN MS24625-19Tapping Screw
- 5305-00-079-7960 MPN MS24694S208Machine Screw
- 5305-00-088-8358 MPN MS35190-246Machine Screw
- 5305-00-108-9698 MPN MS21125-4-21Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-927-4220 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1152E10 | National Aerospace Standards |
NAS1152C10 | National Aerospace Standards |