NSN 5305-00-927-5360
High Torque Screw
Retaining element in shank.
Manufacturer part number AS104-04-23 for national stock number 5305009275360.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-927-5360.
-
MPN or Model
AS104-04-23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.270 inches and 0.290 inches -
Fastener Length
Between 1.875 inches and 1.915 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.3737 inches and 0.3742 inches -
Head Height
Between 0.253 inches and 0.273 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 1.437 inches and 1.457 inches -
Width Across Flats
Between 0.187 inches and 0.190 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.546 inches first hole and 1.566 inches first hole -
Material
Steel comp 630 -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-189-5853 MPN CA1378-6-2-8Panel Screw Assembly
- 5305-01-307-3814 MPN CA21169-3-7Machine Screw
- 5305-01-322-7320 MPN CA8010-8-A-2QPanel Screw Assembly
- 5305-01-359-2510 MPN CA2227-08-3-8Machine Screw
- 5306-01-308-4800 MPN CA12020-1BInternal Wrenching Bolt
- 4920-00-021-5130 MPN 12A1300-807Test Adapter Kit
- 1560-00-192-5141 MPN 12W9267-3Aircraft Structural Component Support
- 4920-00-268-3376 MPN 12A01JN1-1Aircraft Maintenance Fixture
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-927-5360 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS104-04-23 | Avibank Mfg., Inc. |
CC00035-4-23 | Lockheed Martin Corporation |
CA2730-4-23 | Arconic Global Fasteners & Rings, |