NSN 5305-00-928-9513
High Torque Screw
Between 0.761 inches and 0.791 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1153V8 for national stock number 5305009289513.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-928-9513.
-
MPN or Model
NAS1153V8
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI Sub1 -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.761 inches and 0.791 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r54520 -
Material Specification
Nas 621, 6al-4v assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1153 professional/industrial association standard
More from these suppliers
- 5940-01-449-7674 MPN NAS1063A12-N1000Terminal Board Marker Strip
- 5940-01-451-2685 MPN NAS1063E3-551WTerminal Board Marker Strip
- 5940-01-455-2465 MPN NAS1063A12-173UTerminal Board Marker Strip
- 5935-01-323-4639 MPN MS33684-18-10PElectrical Connector Insert
- 5940-01-660-0092 MPN NAS1063A2-536GTerminal Board Marker Strip
- 5305-00-003-6824 MPN NAS6002U26Machine Screw
- 5305-00-035-5382 MPN NAS1581A3H11Close Tolerance Screw
- 5305-00-059-3659 MPN MS51958-63Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-928-9513 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1153V8 | National Aerospace Standards |
10408158 | Nimikkeistokeskus Ncb Finland |