NSN 5305-00-929-9215
High Torque Screw
Two spring loaded balls in shank as self retaining feature.
Manufacturer part number 7823864-1-04-17 for national stock number 5305009299215.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-929-9215.
-
MPN or Model
7823864-1-04-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.268 inches and 0.315 inches -
Fastener Length
Between 1.350 inches and 1.377 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.131 inches and 0.141 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 1.062 inches and 1.082 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Fs251 fscm 88277 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-901-4409 MPN 202-15500-4-15Socket Head Cap Screw
- 1560-00-185-4464 MPN 1083684Propeller Pitch Clip
- 1560-00-287-7062 MPN 5405042-11Bulkhead Cover
- 4820-00-529-4270 MPN 3466651-511Safety Relief Valve
- 1560-00-657-5275 MPN 4673987Cockpit Manifo Duct
- 1560-00-700-3647 MPN 2460933-1Aircraft Tip
- 1560-00-719-6578 MPN 5448373-505Fuselage Frame
- 1560-00-760-3704 MPN 5817154-53Nose Fairing Assy
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-929-9215 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7823864-1-04-17 | Boeing Company, The |
AS101-04-17 | Avibank Mfg., Inc. |
7823864-1-04-17 | Avibank Mfg., Inc. |