NSN 5305-00-929-9216
High Torque Screw
Two spring loaded balls in shank as self retaining feature.
Manufacturer part number 7823864-1-04-14 for national stock number 5305009299216.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-929-9216.
-
MPN or Model
7823864-1-04-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.268 inches and 0.315 inches -
Fastener Length
Between 1.163 inches and 1.190 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.131 inches and 0.141 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 0.875 inches and 0.895 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.035 inches first hole and 1.082 inches first hole -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Fs251, fscm 88277 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5306-00-486-5596 MPN AS194-3-10Close Tolerance Bolt
- 5320-01-361-3558 MPN ADBBC3-14Blind Rivet
- 1680-00-011-9833 MPN 4821342-1Seat Rel Cable Assy
- 1560-00-046-4550 MPN 4382831-501Airfoil Rib
- 1560-00-108-7292 MPN 4118923Aircraft Structural Component Support
- 1560-00-121-7348 MPN 2118783Aircraft Structural Component Bracket
- 1560-00-122-6906 MPN 5117775Oil Cooler Shutter Assembly
- 1560-00-123-3950 MPN 5115224-6Transition Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-929-9216 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7823864-1-04-14 | Boeing Company, The |
AS101-04-14 | Avibank Mfg., Inc. |
7823864-1-04-14 | Avibank Mfg., Inc. |
Stock Check
- NS: 1
- NE: 2