NSN 5305-00-934-0111
Bolt Stove
Between 0.281 inches and 0.312 inches fastener length, fillister head style, between 0.208 inches and 0.226 inches head diameter, head height: between 0.089 inches and 0.096 inches .
Manufacturer part number MS35277-27 for national stock number 5305009340111.
Datasheet
-
Product description
Machine Screw NSN 5305-00-934-0111.
-
MPN or Model
MS35277-27
-
Schedule B
7616.10.6000 (Threaded fasteners of aluminum) -
NMF (National Motor Freight)
013680 - Alum Screws -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.250 inches and 0.312 inches -
Fastener Length
Between 0.281 inches and 0.312 inches -
Head Style
Fillister -
Head Diameter
Between 0.208 inches and 0.226 inches -
Head Height
Between 0.089 inches and 0.096 inches -
Hole Diameter
0.046 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.138 inches -
Hole Quantity
1 -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
62000 pounds per square inch -
Screw Material
Aluminum alloy 2024 -
Screw Material Specification
Qq-a-225/6 federal specification single material response -
Screw Surface Treatment
Oxide film -
Screw Surface Treatment Specification
Mil-c-5541 military specification single treatment response -
Head Hole Configuration Style
Round -
Thread Series Designator
Unc
More from these suppliers
- 5940-00-028-7995 MPN MS27212-1-9Terminal Board
- 5940-00-082-4642 MPN MS18029-11S6Terminal Board Cover
- 5935-00-103-7911 MPN MS24264R22B55P7XLEVELXElectrical Receptacle Connector
- 5905-00-141-0597 MPN MS35043-128Composition Fixed Resistor
- 5940-00-204-8990 MPN MS205036-111Lug Terminal
- 5935-00-233-3994 MPN MS3108A18-4SCElectrical Plug Connector
- 5935-00-259-0188 MPN MS3106B16S1PElectrical Plug Connector
- 5935-00-259-7419 MPN MS3108B28-14SElectrical Plug Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-934-0111 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35277-27 | Military Standards |