NSN 5305-00-935-7587
High Torque Screw
Between 2.136 inches and 2.166 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1881 inches and 0.1887 inches .
Manufacturer part number NAS1153V30 for national stock number 5305009357587.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-935-7587.
-
MPN or Model
NAS1153V30
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 2.136 inches and 2.166 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1881 inches and 0.1887 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy -
Material Specification
Nas 621-4v assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5935-01-067-1255 MPN NAS714-23Electrical Receptacle Connector
- 1560-01-572-8717 MPN L3003941-031Aircraft Access Door
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5305-00-052-7496 MPN MS16995-95Socket Head Cap Screw
- 5305-00-225-3859 MPN MS24674-26Socket Head Cap Screw
- 5305-00-225-8477 MPN MS24693-S146Machine Screw
- 5305-00-281-8560 MPN NAS221-25Machine Screw
- 5305-00-419-0769 MPN NAS602-52PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-935-7587 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1153V30 | National Aerospace Standards |
NAS1153V30 | National Aerospace Standards |
NAS1153V30 | National Aerospace Standards |
NAS1153V30 | National Aerospace Standards |
NAS1153V30 | National Aerospace Standards |
NAS1153V30 | National Aerospace Standards |
NAS1153V30 | National Aerospace Standards |