NSN 5305-00-937-1779
Bolt Stove
0.838 inches fastener length, flat countersunk head style, between 0.297 inches and 0.302 inches head diameter, internal drive style: high-torque.
Manufacturer part number HT184-3-9 for national stock number 5305009371779.
Datasheet
-
Product description
Machine Screw NSN 5305-00-937-1779.
-
MPN or Model
HT184-3-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
0.838 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
Between 40.0 rockwell c and 43.0 rockwell c -
Countersink Angle
100.0 degrees -
Screw Material
Steel comp 8630 or steel comp 4037 -
Screw Material Specification
Mil-s-6050 military specification 1st material response or ams 6300 assn standard 2nd material response -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5905-01-403-2764 MPN 9391820-2Thermal Resistor
- 5305-00-508-3248 MPN LS15234C08-16Close Tolerance Screw
- 5305-00-724-3757 MPN NAS1204-40DClose Tolerance Screw
- 5305-00-763-4984 MPN NAS1190E3T5LSocket Head Cap Screw
- 5305-00-877-9304 MPN NAS1202-18Close Tolerance Screw
- 5305-01-013-9599 MPN HT309-7D25Close Tolerance Screw
- 5305-01-136-1723 MPN NAS1189E04T7LSocket Head Cap Screw
- 5305-01-310-3962 MPN HT4049-4D23Close Tolerance Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-937-1779 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT184-3-9 | Hi-shear Corporation |