NSN 5305-00-943-5336
High Torque Screw
Between 1.129 inches and 1.159 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, locking feature: patch grip or pellet grip or strip grip.
Manufacturer part number NAS2804-11 for national stock number 5305009435336.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-943-5336.
-
MPN or Model
NAS2804-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.431 inches and 0.481 inches -
Fastener Length
Between 1.129 inches and 1.159 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Locking Feature
Patch grip or pellet grip or strip grip -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.673 inches and 0.703 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium -
Thread Series Designator
Unf -
Specification Data
80205-nas2804 professional/industrial association standard
More from these suppliers
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5305-00-059-3661 MPN MS51958-65Machine Screw
- 5305-00-071-2242 MPN NASM90725-9Hexagon Head Cap Screw
- 5305-00-079-2824 MPN NAS1101C4-10Machine Screw
- 5305-00-079-7979 MPN MS24694S197Machine Screw
- 5305-00-143-3201 MPN MS21093-343Machine Screw
- 5305-00-177-5759 MPN NAS1635-06LE12Socket Head Cap Screw
- 5305-00-230-7465 MPN MS51021-33Setscrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-943-5336 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2804-11 | National Aerospace Standards |