NSN 5305-00-944-7557
High Torque Screw
Between 0.814 inches and 0.844 inches fastener length, flat countersunk head style, between 0.717 inches and 0.760 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS1506-7 for national stock number 5305009447557.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-944-7557.
-
MPN or Model
NAS1506-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.366 inches and 0.416 inches -
Fastener Length
Between 0.814 inches and 0.844 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.717 inches and 0.760 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4130 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1506 professional/industrial association standard
More from these suppliers
- 5940-01-372-2501 MPN NAS1063B-21-40Terminal Board Marker Strip
- 5940-01-439-4145 MPN NAS1063A14-1HTerminal Board Marker Strip
- 5940-01-614-7617 MPN NAS1063C10-210KTerminal Board Marker Strip
- 5305-00-005-5809 MPN NAS1631E3Machine Screw
- 5305-00-007-0288 MPN NAS1191E08T7Socket Head Cap Screw
- 5305-00-057-0494 MPN MS24694S10Machine Screw
- 5305-00-058-4035 MPN NAS334CP15Close Tolerance Screw
- 5305-00-060-9741 MPN MS21295-53Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-944-7557 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1506-7 | National Aerospace Standards |