NSN 5305-00-950-0718
High Torque Screw
Between 3.141 inches and 3.188 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number NAS334C31 for national stock number 5305009500718.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-950-0718.
-
MPN or Model
NAS334C31
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.443 inches and 0.510 inches -
Fastener Length
Between 3.141 inches and 3.188 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Single Shear Strength
4650 pounds per square inch -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 2.678 inches and 2.698 inches -
Width Across Flats
Between 0.157 inches and 0.159 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.990 inches first hole and 3.010 inches first hole -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification all treatment responses -
Thread Series Designator
Unf -
Specification Data
80205-nas334 professional/industrial association standard
More from these suppliers
- 5940-01-425-6040 MPN NAS1063A15-435Terminal Board Marker Strip
- 5305-00-057-9587 MPN MS35199-16Machine Screw
- 5305-00-081-1474 MPN NAS608C832H24Socket Head Cap Screw
- 5305-00-086-7865 MPN NAS1631C7Machine Screw
- 5305-00-145-0713 MPN MS16995-18BSocket Head Cap Screw
- 5305-00-165-7962 MPN NAS1352-04H8Socket Head Cap Screw
- 5305-00-170-2931 MPN NAS1352C8-10Socket Head Cap Screw
- 5305-00-224-9280 MPN NAS1352-02-16PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-950-0718 close tolerance screwManufacturer Part Numbers and Alternates
| MPN manufacturer part number | Registrant or Supplier |
|---|---|
| NAS334C31 | National Aerospace Standards |
| NAS334C31 | National Aerospace Standards |
| NAS334C31 | National Aerospace Standards |
Stock Check
