NSN 5305-00-959-1699
High Torque Screw
Between 2.141 inches and 2.171 inches fastener length, flat countersunk head style, between 1.014 inches and 1.017 inches head diameter, grip diameter: between 0.4985 inches and 0.4995 inches .
Manufacturer part number NAS588-22 for national stock number 5305009591699.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-959-1699.
-
MPN or Model
NAS588-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.756 inches and 0.806 inches -
Fastener Length
Between 2.141 inches and 2.171 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.014 inches and 1.017 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.500 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 8740 or steel comp 8735 or steel comp 6150 or steel comp 4140 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-391-1824 MPN NAS1063B26-45Terminal Board Marker Strip
- 5305-00-003-8159 MPN NAS1351-5-20PSocket Head Cap Screw
- 5305-00-008-5853 MPN NAS1630E18PMachine Screw
- 5305-00-008-5888 MPN NAS1102E06-12PMachine Screw
- 5305-00-051-4485 MPN MS51973-10Setscrew
- 5305-00-067-3863 MPN NAS1189-3P7NSocket Head Cap Screw
- 5305-00-108-0923 MPN NAS1300C3T12Thumbscrew
- 5305-00-121-2460 MPN NAS1404-2Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-959-1699 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS588-22 | National Aerospace Standards |