NSN 5305-00-959-5335
High Torque Screw
Between 2.204 inches and 2.234 inches fastener length, flat countersunk head style, between 1.014 inches and 1.017 inches head diameter, grip diameter: between 0.4985 inches and 0.4995 inches .
Manufacturer part number NAS588-23 for national stock number 5305009595335.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-959-5335.
-
MPN or Model
NAS588-23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.756 inches and 0.806 inches -
Fastener Length
Between 2.204 inches and 2.234 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.014 inches and 1.017 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.500 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8735 or steel comp 6150 or steel comp 4140 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-1558 MPN NAS1100C04-14PMachine Screw
- 5305-00-008-5908 MPN NAS1189C04T4LSocket Head Cap Screw
- 5305-00-053-1117 MPN MS24621-16Tapping Screw
- 5305-00-055-2812 MPN MS24693-A9Machine Screw
- 5305-00-126-6154 MPN NAS1623C29Machine Screw
- 5305-00-143-3252 MPN NAS1352C5LN24Socket Head Cap Screw
- 5305-00-150-3411 MPN NAS1191-08P10NSocket Head Cap Screw
- 5305-00-150-3445 MPN MS51959-32BMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-959-5335 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS588-23 | National Aerospace Standards |
NAS588-23 | National Aerospace Standards |
NAS588-23 | National Aerospace Standards |
NAS588-23 | National Aerospace Standards |
NAS588-23 | National Aerospace Standards |
NAS588-23 | National Aerospace Standards |
NAS588-23 | National Aerospace Standards |
NAS588-23 | National Aerospace Standards |
NAS588-23 | National Aerospace Standards |
NAS588-23 | National Aerospace Standards |
NAS588-23 | National Aerospace Standards |
NAS588-23 | National Aerospace Standards |
NAS588-23 | National Aerospace Standards |
NAS588-23 | National Aerospace Standards |
NAS588-23 | National Aerospace Standards |
NAS588-23 | National Aerospace Standards |
NAS588-23 | National Aerospace Standards |