NSN 5305-00-962-5634
High Torque Screw
Between 4.360 inches and 4.390 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS1205-64 for national stock number 5305009625634.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-962-5634.
-
MPN or Model
NAS1205-64
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
Between 4.360 inches and 4.390 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.312 inches -
Grip Length
4.000 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas1205-80 professional/industrial association standard
More from these suppliers
- 5940-01-135-7077 MPN NAS1744-7Conductor Splice
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5305-00-007-9882 MPN NAS1100E04-18PMachine Screw
- 5305-00-052-9056 MPN MS24630-44Tapping Screw
- 5305-00-079-7368 MPN NAS1190C06P10LSocket Head Cap Screw
- 5305-00-115-9714 MPN NAS1622-9Machine Screw
- 5305-00-174-8711 MPN NAS1216-3E18Machine Screw
- 5305-00-180-0004 MPN AN525-8R8Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-962-5634 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1205-64 | National Aerospace Standards |