NSN 5305-00-969-7479
High Torque Screw
Between 0.636 inches and 0.666 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1153C6 for national stock number 5305009697479.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-969-7479.
-
MPN or Model
NAS1153C6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.636 inches and 0.666 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas1153 professional/industrial association standard
More from these suppliers
- 5975-00-054-9372 MPN NAS1668-2Plug
- 5935-00-137-4487 MPN NAS1643R16T24SWElectrical Plug Connector
- 1680-01-517-0727 MPN NAS1336A5C10DAircr Swing Arm Pin
- 5305-00-021-4078 MPN NAS1221-3-3Machine Screw
- 5305-00-052-7493 MPN MS24629-62Tapping Screw
- 5305-00-052-9048 MPN MS24630-33Tapping Screw
- 5305-00-057-0528 MPN MS51958-46Machine Screw
- 5305-00-066-7322 MPN MS24694C52Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-969-7479 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1153C6 | National Aerospace Standards |
NAS1153C6 | National Aerospace Standards |
NAS1153C6 | National Aerospace Standards |