NSN 5305-00-983-7460
Button Head Socket Screw
About this product
Between 0.069 inches and 1.000 inches fastener length, flat chamfer head style, between 0.735 inches and 0.750 inches head diameter, head height: between 0.492 inches and 0.500 inches .
Manufacturer part number MS16997-141 for national stock number 5305009837460.
Datasheet
-
Product description
Socket Head Cap Screw NSN 5305-00-983-7460.
-
MPN or Model
MS16997-141
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.000 inches -
Fastener Length
Between 0.069 inches and 1.000 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.735 inches and 0.750 inches -
Head Height
Between 0.492 inches and 0.500 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.500 inches -
Width Across Flats
Between 0.375 inches and 0.379 inches -
Thready Qty Per Inch (tpi)
13 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 43.0 rockwell c -
Material
Steel -
Material Specification
66 federal standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 4820-01-273-3211 MPN V037611Pressure And Temperature Relief Valve
- 5930-01-294-3559 MPN L116711Pressure Switch
- 5935-01-426-4698 MPN 222-22Electrical Plug Connector
- 5930-01-545-8621 MPN 239408A1Electronic Switch
- 5306-01-531-2220 MPN 426-620Machine Bolt
- 5935-01-308-2666 MPN 7-709-990060Plug Dummy Connector
- 5935-01-395-0047 MPN 7-689-000503Electrical Connector End Seal Plug
- 5935-01-460-2391 MPN 6-294-009309Electrical Plug Connector
Socket Head Cap Screw
An externally threaded fastener whose threaded portion is of one nominal diameter. The head has an internal socket or multiple spline for use with an inserted driver. A locking feature may be incorporated in the design of the head or threads. Excludes items with bevel (conical) heads. See bolt, internal wrenching. Excludes screw, shoulder; and screw, machine.
Pricing and Availability
Get a quote for 5305-00-983-7460 socket head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS16997-141 | Military Standards |
TIP01373 | Cecom Lr Center |
61-816 | Cnh Industrial America Llc |
7-110-180805 | Grove U.s. L.l.c |
2197HX | Oshkosh Corporation |
2197HX | Oshkosh Defense, Llc |
Stock Check
Availability for this item was last checked on 03/29/23.
The quantities and conditions available at the time were:
- NS: 1516
- NE: 1651
- AR: 1
- SV: 1