NSN 5305-00-984-7359
Bolt Stove
1.000 inches fastener length, flat countersunk head style, between 0.292 inches and 0.332 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number MS35191-258 for national stock number 5305009847359.
Datasheet
-
Product description
Machine Screw NSN 5305-00-984-7359.
-
MPN or Model
MS35191-258
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.944 inches and 1.000 inches -
Fastener Length
1.000 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.292 inches and 0.332 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
36 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel comp 1010 or steel comp 1011 or steel comp 1013 -
Screw Material Specification
66 federal standard all material responses -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-009-3157 MPN MS3476L20-41SElectrical Plug Connector
- 5930-00-050-2690 MPN MS25102-3Toggle Switch
- 5940-00-058-8939 MPN 397-10Terminal Board Cover
- 5935-00-102-7999 MPN MS16108-10CTip Jack
- 5905-00-141-1071 MPN MS35043-151Composition Fixed Resistor
- 5935-00-171-0142 MPN MS27484T24B2SElectrical Plug Connector
- 5935-00-199-0333 MPN MS3102K12S-4PElectrical Receptacle Connector
- 5935-00-240-1694 MPN MS3128F12-3SElectrical Receptacle Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-984-7359 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35191-258 | Military Standards |