NSN 5305-00-988-6725
High Torque Screw
Between 0.751 inches and 0.781 inches fastener length, flat countersunk head style, between 0.704 inches and 0.762 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS1206-6 for national stock number 5305009886725.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-988-6725.
-
MPN or Model
NAS1206-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.366 inches and 0.416 inches -
Fastener Length
Between 0.751 inches and 0.781 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.704 inches and 0.762 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas1206 professional/industrial association standard
More from these suppliers
- 5305-00-405-5962 MPN NAS1189E04P6LSocket Head Cap Screw
- 5305-00-720-9112 MPN NAS1204-4Close Tolerance Screw
- 5306-00-948-7232 MPN NAS1114-28DShear Bolt
- 5305-00-494-7331 MPN NAS1189-06P12Socket Head Cap Screw
- 5306-00-486-9014 MPN NAS1003-27Machine Bolt
- 5305-01-026-0836 MPN NAS1121-26HClose Tolerance Screw
- 5305-01-057-0310 MPN NAS1189E08T18LSocket Head Cap Screw
- 5320-00-926-5892 MPN NAS1198-5-7Solid Rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-988-6725 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1206-6 | National Aerospace Standards |
NAS1206-6 | Nor-cal Supply Co.inc. |
NAS1206-6 | Hi-shear Corporation |
NAS1206-6 | Sps Technologies, Llc |
NAS1206-6 | Eriks Southwest Inc |
NAS1206-6 | Apcom Inc |
NAS1206-6 | Sps Technologies, Llc |
NAS1206-6 | Lawrence Engineering And Supply Inc |
NAS1206-6 | F And C Sales Inc |
NAS1206-6 | Collins Engineering Corp |
NAS1206-6 | Durham Aircraft Service Inc |
NAS1206-6 | Air Industries Co Inc |