NSN 5305-01-003-5926
High Torque Screw
1.300 inches fastener length, flat chamfer head style, between 0.367 inches and 0.375 inches head diameter, head height: between 0.133 inches and 0.150 inches .
Manufacturer part number 903206-314 for national stock number 5305010035926.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-003-5926.
-
MPN or Model
903206-314
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
1.300 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.367 inches and 0.375 inches -
Head Height
Between 0.133 inches and 0.150 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
0.875 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Stainless steel -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5950-00-270-3405 MPN 989110-8BRadio Frequency Coil
- 5975-00-322-3712 MPN 463673-110Electrical Equipment Rack
- 5935-00-325-9374 MPN 922463-119Electrical Connector Cable Clamp
- 5985-00-461-8000 MPN 3182536Directional Coupler
- 5945-00-665-7456 MPN 951600-12Thermal Relay
- 5930-00-845-6251 MPN 546033Thermostatic Switch
- 5935-00-943-7133 MPN 712228-249Electrical Plug Connector
- 5935-00-990-1481 MPN 4118842-13Electrical Receptacle Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-003-5926 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
903206-314 | Raytheon Company |
903206-314 | Raytheon Company |