NSN 5305-01-004-0405
High Torque Screw
Between 0.761 inches and 0.791 inches fastener length, flat countersunk head style, between 0.280 inches and 0.337 inches head diameter, grip diameter: between 0.1621 inches and 0.1627 inches .
Manufacturer part number NAS1152E8 for national stock number 5305010040405.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-004-0405.
-
MPN or Model
NAS1152E8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.761 inches and 0.791 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.280 inches and 0.337 inches -
Grip Diameter
Between 0.1621 inches and 0.1627 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1152 professional/industrial association standard
More from these suppliers
- 5305-00-007-6187 MPN NAS1100E08-32Machine Screw
- 5305-00-052-3618 MPN NAS1633E3Machine Screw
- 5305-00-057-9598 MPN MS21207-6-14Tapping Screw
- 5305-00-087-7740 MPN NAS1189-06P5Socket Head Cap Screw
- 5305-00-207-8740 MPN NAS333FA5Close Tolerance Screw
- 5305-00-269-3210 MPN MS90725-59Hexagon Head Cap Screw
- 5305-00-269-4524 MPN MS24694S180Machine Screw
- 5305-00-271-5214 MPN MILS7839Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-004-0405 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1152E8 | National Aerospace Standards |
NAS1152C8 | National Aerospace Standards |
NAS1152E8 | National Aerospace Standards |
NAS1152C8 | National Aerospace Standards |
NAS1152E8 | National Aerospace Standards |
NAS1152C8 | National Aerospace Standards |
NAS1152E8 | National Aerospace Standards |
NAS1152C8 | National Aerospace Standards |
NAS1152C8 | National Aerospace Standards |
NAS1152E8 | National Aerospace Standards |
NAS1152E8 | National Aerospace Standards |
NAS1152C8 | National Aerospace Standards |