NSN 5305-01-004-4094
High Torque Screw
Between 3.226 inches and 3.246 inches fastener length, flat chamfer head style, between 0.722 inches and 0.740 inches head diameter, head height: between 0.189 inches and 0.204 inches .
Manufacturer part number MS21125-643 for national stock number 5305010044094.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-004-4094.
-
MPN or Model
MS21125-643
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.351 inches and 0.402 inches -
Fastener Length
Between 3.226 inches and 3.246 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.722 inches and 0.740 inches -
Head Height
Between 0.189 inches and 0.204 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.375 inches -
Grip Length
Between 2.688 inches and 2.704 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.099 inches first hole and 3.119 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 1 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-901-4409 MPN CA4850-04-15Socket Head Cap Screw
- 5305-01-008-5365 MPN CA29040-08-3-7PPanel Screw Assembly
- 5305-01-188-8109 MPN CA21062-08-2-10Captive Screw
- 5305-01-197-3998 MPN CA2651-4-10Close Tolerance Screw
- 5305-01-366-9895 MPN CA28114-06-6HSPanel Screw Assembly
- 5935-01-421-0969 MPN NAS1834-3-550Electrical Connector Insert
- 5305-00-052-6683 MPN MS35198-34Machine Screw
- 5305-00-052-7405 MPN MS24617-47Tapping Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-004-4094 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21125-643 | National Aerospace Standards |
MS21125-643 | Military Standards |
MS21125A643 | Military Standards |
CA2651-6-43 | Arconic Global Fasteners & Rings, |