NSN 5305-01-004-9124
High Torque Screw
Between 3.437 inches and 3.484 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number NAS336CP33 for national stock number 5305010049124.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-004-9124.
-
MPN or Model
NAS336CP33
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.625 inches and 0.672 inches -
Fastener Length
Between 3.437 inches and 3.484 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Grip Length
2.812 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.250 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas336 professional/industrial association standard
More from these suppliers
- 5935-01-256-0827 MPN NAS1678H10B6PNElectrical Plug Connector
- 5940-01-527-1122 MPN NAS1063Terminal Board Marker Strip
- 5940-01-381-7272 MPN NAS1063B168-179Terminal Board Marker Strip
- 5940-01-384-3878 MPN NAS1063A2TB107TTerminal Board Marker Strip
- 5940-01-384-3971 MPN NAS1063D2-2Terminal Board Marker Strip
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5305-00-007-0282 MPN NAS1100E08-12PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-004-9124 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS336CP33 | National Aerospace Standards |
NAS336CP33 | National Aerospace Standards |
NAS336CP33 | National Aerospace Standards |
NAS336CP33 | National Aerospace Standards |
NAS336CP33 | National Aerospace Standards |
NAS336CP33 | National Aerospace Standards |