NSN 5305-01-005-3182
Bolt Stove
Between 0.281 inches and 0.313 inches fastener length, flat countersunk head style, between 0.191 inches and 0.225 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number 0126011-1 for national stock number 5305010053182.
Datasheet
-
Product description
Machine Screw NSN 5305-01-005-3182.
-
MPN or Model
0126011-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.182 inches and 0.264 inches -
Fastener Length
Between 0.281 inches and 0.313 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.191 inches and 0.225 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 -
Screw Surface Treatment
Oxide -
Screw Surface Treatment Specification
Mil-c-13924 military specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-01-025-9629 MPN 0126241-3Electrical Receptacle Connector
- 5305-00-865-8957 MPN 3530Externally Relieved Body Screw
- 5305-01-106-6956 MPN P330-0042-000Machine Screw
- 5305-00-003-9479 MPN 1081H04H05Panel Screw Assembly
- 5305-00-050-9232 MPN GA3135-066Machine Screw
- 5305-00-054-5647 MPN 514-90376-204Machine Screw
- 5305-00-068-5410 MPN 100A900003Socket Head Cap Screw
- 5305-00-071-2056 MPN MS35297-90Hexagon Head Cap Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-005-3182 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
0126011-1 | Zf Industrieantriebe Witten Gmbh |
P330-4057-070 | Allied Products Corp Pheoll Mfg Co |
17609 | Naval Electronic Systems Security |