NSN 5305-01-006-3898
High Torque Screw
Between 1.499 inches and 1.546 inches fastener length, flat countersunk head style, between 0.626 inches and 0.672 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number HT239PB7-17 for national stock number 5305010063898.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-006-3898.
-
MPN or Model
HT239PB7-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.427 inches and 0.494 inches -
Fastener Length
Between 1.499 inches and 1.546 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.626 inches and 0.672 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 4130 or steel comp 4140 or steel comp 4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-8503 military specification 5th material response or mil-s-6758 military specification 6th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-099-7659 MPN NAS1221-08E3Machine Screw
- 5305-00-508-6352 MPN LS15235C4-17DClose Tolerance Screw
- 5305-00-571-9592 MPN 76122-4-3Machine Screw
- 5305-00-685-7185 MPN NAS1144-7Close Tolerance Screw
- 5305-00-815-3985 MPN 54291-3-4Close Tolerance Screw
- 5305-01-015-3364 MPN HT4Q25L3-8Close Tolerance Screw
- 5305-01-045-5609 MPN HT4009-3-6Shoulder Screw
- 5305-01-055-1145 MPN BACB30LU3-18Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-006-3898 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT239PB7-17 | Hi-shear Corporation |
HT239PB7-17 | Sps Technologies, Llc |
HT239PB7-17 | Alcoa Global Fasteners, Inc. |