NSN 5305-01-006-3899
High Torque Screw
Between 0.927 inches and 0.947 inches fastener length, flat chamfer head style, between 0.306 inches and 0.313 inches head diameter, head height: between 0.185 inches and 0.190 inches .
Manufacturer part number 3012T01P03 for national stock number 5305010063899.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-006-3899.
-
MPN or Model
3012T01P03
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.389 inches and 0.426 inches -
Fastener Length
Between 0.927 inches and 0.947 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.306 inches and 0.313 inches -
Head Height
Between 0.185 inches and 0.190 inches -
Grip Diameter
Between 0.1890 inches and 0.1900 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.190 inches -
Grip Length
Between 0.474 inches and 0.484 inches -
Width Across Flats
Between 0.156 inches and 0.158 inches -
Thready Qty Per Inch (tpi)
32 -
Surface Finish
32.0 microinches threads -
Material
Nickel alloy -
Material Specification
Ams 5708 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5945-00-088-3481 MPN 21C2200-089Electromagnetic Relay
- 1680-00-533-6760 MPN 292C346P1Remote Control Lever
- 4820-00-772-3191 MPN 4025T84P01Safety Relief Valve
- 4920-00-872-3955 MPN 21C1420G001R Alignment Fixture
- 4920-01-460-5997 MPN 21C14116G03Aircraft Engine Maintenance Fixture
- 4920-01-477-4920 MPN 21C14240G03Aircraft Engine Maintenance Fixture
- 1680-01-514-8386 MPN 5128T43G01Bell Crank
- 5306-00-867-7660 MPN 3011T47P01Special Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-006-3899 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3012T01P03 | General Electric Company |
Stock Check
![](/public/images/partscage_shelf3.png)