NSN 5305-01-006-5008
High Torque Screw
1.219 inches fastener length, flat countersunk head style, between 0.502 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 3MA584-12T for national stock number 5305010065008.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-006-5008.
-
MPN or Model
3MA584-12T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.419 inches -
Fastener Length
1.219 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.502 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4130 -
Material Specification
Mil-s-6758 military specification single material response -
Surface Treatment
Primer bearing surface of head -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-005-9110 MPN 53G970602-8Bell Crank
- 1560-00-021-4517 MPN 32-33195-1Insulation Assembly
- 1560-00-027-7745 MPN 32-33127-3Airfoil Rib
- 1560-00-064-7797 MPN 53-42001-125Aircraft Skin
- 1560-00-070-9711 MPN 32-80084-7Control Assembly Arm
- 1560-00-092-8646 MPN 53-73202-81Aircraft Hinge
- 1560-00-125-5395 MPN 32-11121-26Catapult Fitting
- 1560-00-140-6521 MPN 32-33002-1003Aircraft Skin
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-006-5008 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MA584-12T | Boeing Company, The |
3MFR584-12T | Boeing Company, The |