NSN 5305-01-007-0474
High Torque Screw
1.070 inches fastener length, flat chamfer head style, between 0.311 inches and 0.312 inches head diameter, head height: between 0.095 inches and 0.105 inches .
Manufacturer part number 090-33701-1 for national stock number 5305010070474.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-007-0474.
-
MPN or Model
090-33701-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.320 inches -
Fastener Length
1.070 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.311 inches and 0.312 inches -
Head Height
Between 0.095 inches and 0.105 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.077 inches first hole and 0.082 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Grip Length
0.750 inches -
Thready Qty Per Inch (tpi)
32 -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.960 inches first hole -
Material
Steel comp 324 -
Material Specification
Mil-s-862 military specification single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
E+1204 fscm 28652 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4820-01-107-2208 MPN 36390 FIND 43Release Lever
- 5930-01-355-1528 MPN A05622-181Push Switch
- 4820-01-384-4098 MPN A53506-1Check Valve Retainer
- 4820-01-145-5304 MPN TX 152236Directional Control Linear Valve Sleeve And Slide
- 5305-01-384-2167 MPN A01408-508Socket Head Cap Screw
- 6105-01-532-7799 MPN C80334Electric Motor Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-007-0474 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
090-33701-1 | Moog Inc. |
Stock Check
![](/public/images/partscage_shelf3.png)