NSN 5305-01-007-7064
High Torque Screw
Between 0.422 inches and 0.452 inches fastener length, oval countersunk head style, between 0.2966 inches and 0.3016 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4041-3-2-5 for national stock number 5305010077064.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-007-7064.
-
MPN or Model
HT4041-3-2-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.287 inches and 0.337 inches -
Fastener Length
Between 0.422 inches and 0.452 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.2966 inches and 0.3016 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-503-5683 MPN LS15266V3-9Close Tolerance Screw
- 5305-01-082-2029 MPN CVC241AC4-9Machine Screw
- 5305-01-110-9771 MPN HT4067-4-8AClose Tolerance Screw
- 5305-01-158-5371 MPN SC2163-3-9Machine Screw
- 5305-01-197-1309 MPN HT1029A4-5Close Tolerance Screw
- 5305-01-203-1663 MPN BACB30LU5-14Close Tolerance Screw
- 5305-01-246-3871 MPN SC1779-4-12Close Tolerance Screw
- 5305-01-487-6877 MPN HT4027-3-7Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-007-7064 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4041-3-2-5 | Arconic Global Fasteners & Rings, |
HT4041-3-2-5 | Huck International, Inc. |
3M707-3-2-5 | Fastener Innovation Technology, Inc. |
3M707-3-2-5 | Boeing Company, The |
HT4041-3-2-5 | Sps Technologies, Llc |
HT4041-3-2-5 | Hi-shear Corporation |
HT4041-3-2-5 | Lisi Aerospace Canada Corp |
HT4041-3-2-5 | Sps Technologies, Llc |
HT4041-3-2-5 | Alcoa Global Fasteners, Inc. |
11873-3-2-5 | Reid Products Inc. |
WC4041-3-2-5 | West Coast Aerospace Inc |
HT4041-3-2-5 | Sps Technologies Ltd Tj Brooks |
3930AS1210-3-2-5 | Naval Air Systems Command |
HT4041-3-2-5 | Sps Technologies Inc |
HT4041-3-2-5 | Huck Intl Inc |
10114824 | Nimikkeistokeskus Ncb Finland |
3M707-3-2-5 | Twist Tite Mfg, Inc |