NSN 5305-01-007-8756
High Torque Screw
Between 1.172 inches and 1.202 inches fastener length, flat countersunk head style, between 0.429 inches and 0.477 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number LS15237-5-13 for national stock number 5305010078756.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-007-8756.
-
MPN or Model
LS15237-5-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.350 inches and 0.400 inches -
Fastener Length
Between 1.172 inches and 1.202 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.429 inches and 0.477 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049rjgcams 6322 military specification 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-194-6903 MPN SFT930-5-27Close Tolerance Screw
- 5305-00-316-7487 MPN 106752-103CMachine Screw
- 5305-00-821-9422 MPN HL10VV-6-3Setscrew
- 5305-00-823-5808 MPN NAS1102-06-12Machine Screw
- 5305-00-842-7566 MPN 66117H6-20Close Tolerance Screw
- 5305-00-851-8148 MPN SPS56585C003-12PSocket Head Cap Screw
- 5305-01-040-1004 MPN BACB30LH3-3Close Tolerance Screw
- 5305-01-179-0336 MPN 20097-H1-96C-8SSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-007-8756 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15237-5-13 | Lockheed Martin Corporation |
AR400 | United Technologies Corporation |
LS15237-5-13 | Sps Technologies, Llc |
LS15237-5-13 | Hi-shear Corporation |
LS15237-5-13 | Alcoa Global Fasteners, Inc. |
LS15237-5-13 | Lisi Aerospace Canada Corp |