NSN 5305-01-008-1106
High Torque Screw
Retaining element in shank.
Manufacturer part number AS131-03-7W for national stock number 5305010081106.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-008-1106.
-
MPN or Model
AS131-03-7W
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.262 inches and 0.313 inches -
Fastener Length
Between 0.810 inches and 0.830 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.360 inches and 0.374 inches -
Head Height
Between 0.095 inches and 0.110 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.438 inches and 0.454 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
39.0 rockwell c and 45.0 rockwell c -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 1 class 3 federal specification single treatment response or qq-p-416 type 2 class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5306-01-328-8895 MPN BACB30ST8-27Shear Bolt
- 5306-01-512-8331 MPN RT1O8-2Mater Aircraft Bolt
- 5306-01-537-0080 MPN AS453A4-14Machine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-008-1106 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS131-03-7W | Avibank Mfg., Inc. |