NSN 5305-01-008-4197
High Torque Screw
Between 1.454 inches and 1.484 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number HT4025L4-16 for national stock number 5305010084197.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-008-4197.
-
MPN or Model
HT4025L4-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 1.454 inches and 1.484 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-477-5959 MPN 3M1169V4-6AClose Tolerance Screw
- 5305-01-207-9350 MPN BACB30LK2U7Close Tolerance Screw
- 5305-01-486-5594 MPN J951P07AMachine Screw
- 5305-01-512-8356 MPN 3M1170C3-8AFClose Tolerance Screw
- 5306-00-175-7997 MPN VAL12004-4-010Machine Bolt
- 5306-00-409-9863 MPN VFK100G-04048Shear Bolt
- 5306-00-505-9830 MPN J646P19AMachine Bolt
- 5306-01-012-0624 MPN VAL23001-4D030Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-008-4197 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L4-16 | Sps Technologies, Llc |
HT4025L4-16 | Hi-shear Corporation |
ST3M454-4L16 | Boeing Company, The |
HT4025L4-16 | Lisi Aerospace Canada Corp |
HT4025L4-16 | Sps Technologies, Llc |
ST3M454-4L16 | Heartland Precision Fasteners, Inc. |
ST3M454-4L16 | Valley-todeco, Inc. |
HT4025L4-16 | Sps Technologies, Llc |
HT4025L4-16 | Arconic Global Fasteners & Rings, |
HT4025L4-16 | Sps Technologies, Llc |
HT4025L4-16 | Huck International, Inc. |
ST3M454-4L16 | Houston Precision Fasteners I, Lp |
ST3M454-4L16 | Fastener Innovation Technology, Inc. |
WC4025L-4-16 | West Coast Aerospace Inc |
HT4025L4-16 | Alcoa Global Fasteners, Inc. |
11905-4L16 | Reid Products Inc. |
HT4025L4-16 | Huck Intl Inc |
ST3M454-4L16 | Twist Tite Mfg, Inc |