NSN 5305-01-010-5823
High Torque Screw
Between 1.140 inches and 1.170 inches fastener length, flat countersunk head style, between 0.266 inches and 0.303 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number LS15237C3-13 for national stock number 5305010105823.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-010-5823.
-
MPN or Model
LS15237C3-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.318 inches and 0.368 inches -
Fastener Length
Between 1.140 inches and 1.170 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.266 inches and 0.303 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-503-5591 MPN NAS1131E2Close Tolerance Screw
- 5305-01-082-7064 MPN NAS1189E4T16Socket Head Cap Screw
- 5305-01-130-6555 MPN 3M933-3-10Machine Screw
- 5305-01-141-7191 MPN 3M902C7-23DShoulder Screw
- 5305-01-141-7899 MPN HT4020-6-16AYShoulder Screw
- 5305-01-144-0988 MPN HT4020-6-10AXShoulder Screw
- 5305-01-149-2592 MPN NAS1189E04P8LSocket Head Cap Screw
- 5305-01-189-8430 MPN 123567-3Setscrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-010-5823 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15237C3-13 | Lockheed Martin Corporation |
LS15237C3-13 | Huck International, Inc. |
LS15237C3-13 | Sps Technologies, Llc |
LS15237C3-13 | Hi-shear Corporation |
LS15237C3-13 | Alcoa Global Fasteners, Inc. |
LS15237C3-13 | Lisi Aerospace Canada Corp |
AR881787-19 | United Technologies Corporation |
LS15237C3-13 | Lockheed Martin Corporation |
AR881787-19 | United Technologies Corporation |