NSN 5305-01-011-7017
High Torque Screw
Retaining element in shank.
Manufacturer part number MS3369-420 for national stock number 5305010117017.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-011-7017.
-
MPN or Model
MS3369-420
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 1.668 inches and 1.688 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 1.250 inches and 1.266 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.573 inches first hole and 1.593 inches first hole -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-037-9333 MPN CA1376-8-3-12Panel Screw Assembly
- 5305-01-303-6354 MPN CA29048-08-650Panel Screw Assembly
- 5305-01-490-2985 MPN CA2292-10-12-12Panel Screw Assembly
- 5306-00-003-4119 MPN CA4510-5-42Close Tolerance Bolt
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5305-00-007-6253 MPN NAS1189-02P4Socket Head Cap Screw
- 5305-00-008-7871 MPN NAS1743C08T6USocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-011-7017 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369-420 | National Aerospace Standards |
AS169-4-20 | Avibank Mfg., Inc. |
MS3369-420 | Military Standards |
CA2658-4-20 | Arconic Global Fasteners & Rings, |
AS169-4-20 | Avibank Mfg., Inc. |
CA2658-4-20 | Arconic Global Fasteners & Rings, |