NSN 5305-01-012-8928
High Torque Screw
Retaining element in shank.
Manufacturer part number AS169-4-16 for national stock number 5305010128928.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-012-8928.
-
MPN or Model
AS169-4-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 1.418 inches and 1.438 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 1.000 inches and 1.016 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.323 inches first hole and 1.343 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-535-6800 MPN CA17247-6-9-1 Two Lug Receptacle
- 5305-00-139-7111 MPN CA4710-0415Close Tolerance Screw
- 5305-01-010-2619 MPN CA30011-2LSocket Head Cap Screw
- 5305-01-044-5211 MPN CA11020-06-2-10PShoulder Screw
- 5305-01-322-9621 MPN CA13000-10-3-100Panel Screw Assembly
- 5305-01-610-3370 MPN CA28080-06-6HSPanel Fastener Screw
- 5306-00-003-4119 MPN CA4510-6-43Close Tolerance Bolt
- 5306-01-415-2397 MPN SS27576-10-24Machine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-012-8928 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS169-4-16 | Avibank Mfg., Inc. |
MS3369B416 | National Aerospace Standards |
MS3369B416 | Military Standards |
CA2658-4-16 | Arconic Global Fasteners & Rings, |
NASM336931E | National Aerospace Standards |