NSN 5305-01-014-1197
High Torque Screw
Between 1.238 inches and 1.285 inches fastener length, flat countersunk head style, between 0.389 inches and 0.394 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HT239-4-15D for national stock number 5305010141197.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-014-1197.
-
MPN or Model
HT239-4-15D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.290 inches and 0.357 inches -
Fastener Length
Between 1.238 inches and 1.285 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.389 inches and 0.394 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.128 inches first hole and 1.148 inches first hole -
Surface Finish
63.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-279-9426 MPN NAS1206-24DClose Tolerance Screw
- 5305-00-324-8487 MPN HT271-3-5Close Tolerance Screw
- 5305-00-435-9102 MPN NAS1191E4T6Socket Head Cap Screw
- 5305-00-582-9223 MPN HT4M-17Close Tolerance Screw
- 5305-00-721-9404 MPN HT164-12Machine Screw
- 5305-00-803-9577 MPN 51B222-7Machine Screw
- 5305-00-841-2291 MPN HT195-6-27Close Tolerance Screw
- 5305-01-024-4754 MPN NAS1221-3-7BMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-014-1197 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT239-4-15D | Hi-shear Corporation |
HT239-4-15D | Lisi Aerospace Canada Corp |
HT239-4-15D | Hi-shear Corporation |
HT239-4-15D | Lisi Aerospace Canada Corp |