NSN 5305-01-014-1199
High Torque Screw
Between 2.250 inches and 2.297 inches fastener length, flat countersunk head style, between 0.555 inches and 0.560 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number HT239-6-30D for national stock number 5305010141199.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-014-1199.
-
MPN or Model
HT239-6-30D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.365 inches and 0.432 inches -
Fastener Length
Between 2.250 inches and 2.297 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.555 inches and 0.560 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.136 inches first hole and 2.156 inches first hole -
Surface Finish
63.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 or steel comp 4130 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-395-3356 MPN HT4024L4-3Close Tolerance Screw
- 5305-00-505-4026 MPN LS15235C4-6Close Tolerance Screw
- 5305-00-550-1577 MPN HT4025L4D25Close Tolerance Screw
- 5305-00-807-6816 MPN HT111-3-6Machine Screw
- 5305-00-935-7579 MPN 3M50-4-19Shoulder Screw
- 5305-01-025-1345 MPN NAS1101E06-8Machine Screw
- 5305-01-076-4881 MPN NAS1101-06-10Machine Screw
- 5305-01-084-4698 MPN HT4016-4-4XShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-014-1199 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT239-6-30D | Hi-shear Corporation |
HT239-6-30D | Lisi Aerospace Canada Corp |
HT239-6-30D | Hi-shear Corporation |
HT239-6-30D | Lisi Aerospace Canada Corp |