NSN 5305-01-014-1201
High Torque Screw
Between 1.072 inches and 1.119 inches fastener length, flat countersunk head style, between 0.698 inches and 0.762 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number SFH22-6A11 for national stock number 5305010141201.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-014-1201.
-
MPN or Model
SFH22-6A11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.441 inches -
Fastener Length
Between 1.072 inches and 1.119 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.698 inches and 0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6485 assn standard single material response or ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-248-5923 MPN 28705N94C12P18ASetscrew
- 5305-00-310-5360 MPN 73573-95-9CSocket Head Cap Screw
- 5305-00-450-5991 MPN NAS1122C1HClose Tolerance Screw
- 5305-00-500-2908 MPN 54266-3-2Close Tolerance Screw
- 5305-00-842-3410 MPN 16991E-4C-12Socket Head Cap Screw
- 5305-00-917-2665 MPN NAS1152-14Close Tolerance Screw
- 5305-00-938-6673 MPN KS17-632-8Socket Head Cap Screw
- 5305-00-943-2166 MPN NAS1190E02P8ISocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-014-1201 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SFH22-6A11 | Sps Technologies, Llc |
SFH22-6A11 | Sps Technologies, Llc |
SFH22-6A11 | Sps Technologies, Llc |
SFH22-6A11 | Sps Technologies, Llc |