NSN 5305-01-014-1722
Bolt Stove
Between 0.844 inches and 0.906 inches fastener length, fillister head style, 0.375 inches head diameter, head height: 0.087 inches .
Manufacturer part number AN525D8R14 for national stock number 5305010141722.
Datasheet
-
Product description
Machine Screw NSN 5305-01-014-1722.
-
MPN or Model
AN525D8R14
-
Schedule B
7616.10.6000 (Threaded fasteners of aluminum) -
NMF (National Motor Freight)
013680 - Alum Screws -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.359 inches and 0.453 inches -
Fastener Length
Between 0.844 inches and 0.906 inches -
Head Style
Fillister -
Head Diameter
0.375 inches -
Head Height
0.087 inches -
Internal Drive Style
Cross recess type ii -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
36 -
Min. Tensile Strength (psi)
62000 pounds per square inch -
Screw Material
Aluminum alloy 2024 or aluminum alloy 2017 -
Screw Material Specification
Qq-a-200/3 federal specification 1st material response or qq-a-225/6 federal specification 1st material response or qq-a-225/5 federal specification 2nd material response -
Screw Surface Treatment
Anodize -
Screw Surface Treatment Specification
Mil-a-8625 military specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-233-7772 MPN NK502-10-8MSocket Head Cap Screw
- 5305-01-440-9280 MPN NM270CR420K6ESetscrew
- 5935-00-199-2622 MPN AN3106A18-10PElectrical Plug Connector
- 5935-00-539-2908 MPN AN3106A32-6SCElectrical Plug Connector
- 5935-00-222-7818 MPN AN3106B32-13PElectrical Plug Connector
- 5305-00-144-3806 MPN AN526-832R5Machine Screw
- 5305-00-156-2503 MPN AN510-10R6Machine Screw
- 5305-00-207-5489 MPN AN530-8-20Tapping Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-014-1722 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN525D8R14 | Aeronautical Standards Group |
NK525D8R14 | Nylok Corporation |
AN525D8R14 | Aeronautical Standards Group |
NK525D8R14 | Nylok Corporation |